|
|
TM 5-2410-237-23
0125 00
INSTALLATION - CONTINUED
NOTE
4
A
21
Weight of final drive case is 280 lb (127 kg).
23.
Attach two lifting links with 3/8-16 x 1-1/2 in. bolts to
forcing screw holes on final drive case (3). Attach lift-
3
ing device to lifting links and position final drive case
on guide pins (4). Remove wire (A) used to hold gear
4
(21) and idler pinion (20).
24.
Push final drive case (3) against steering clutch case
(6). Install 29 capscrews (1) and washers (2). Remove
two guide pins (4) and install two remaining cap-
screws and washers. Tighten all capscrews to 200 lb-ft
20
(271 Nm).
387-282
25.
Remove lifting device and lifting links from final
drive case (3).
4
5
1,2
5
5
6
4
3
387-281
26.
Install sprocket assembly (WP 0141 00).
27.
Refill transmission (WP 0107 00).
28.
Run engine and test drive.
END OF WORK PACKAGE
0125 00-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |