|
|
TM 5-2410-237-23
0125 00
REMOVAL - CONTINUED
NOTE
Weight of final drive case (3) is 280 lb (127 kg).
6.
Tighten three forcing screws (5) until two lifting links
4
5
5
can be attached to final drive case (3). Attach two lift-
ing links with 5/8-11 x 2 in. bolts, nuts and washers to
5
final drive case (3).
7.
Attach suitable lifting device to lifting links and
remove final drive case. Remove forcing screws.
3
4
A
387-282
NOTE
Plugs are destroyed during removal.
8.
If necessary to remove race and roller bearing assemblies (7 and 8), remove two plugs (9) from dowel holes in final
drive case (3) with a slide puller. Discard plugs.
9.
Use a #10-32 screw to remove dowel (10), holding
8
race and roller assembly (7), from final drive case (3).
Remove screw from dowel.
10.
Use a 1/4 in. -20 NC capscrew to remove dowel (11),
holding race and roller assembly (8), from final drive
case (3). Remove capscrew from dowel.
11.
Pull race and roller assemblies (7 and 8) from final
drive case (3).
9,11
9,10
7
387-283
3
0125 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |