 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION RELIEF VALVE REPLACEMENT - CONTINUED
0119 00
REMOVAL - CONTINUED
1.
Remove four capscrews (1), washers (2), two flanges (3) and hose assembly (4) from relief valve (5). Remove and dis-
card O-ring (6).
2.
Remove four capscrews (7), washers (8), two flanges (9) and hose assembly (10) from relief valve (5). Remove and dis-
card O-ring (11).
3.
Disconnect hose assembly (12) from elbow (13). Remove elbow and O-ring (14) from relief valve (5). Discard O-ring.
4.
Disconnect tube assembly (15) from elbow (16). Remove elbow and O-ring (17) from relief valve (5). Discard O-ring.
5.
Remove three capscrews (18), washers (19) and relief valve (5) from torque divider.
6.
Remove two O-rings (20) from relief valve (5) located between relief valve and torque divider. Discard O-rings.
15
20 (HIDDEN)
18,19
5
16,17
387-539
12
10,11 7,8
13,14
9 4,6 1,2
3
INSTALLATION
CAUTION
Care should be taken not to contaminate transmission oil system during installation of relief valve and
hydraulic lines. Contamination of transmission can result in premature failure.
NOTE
Wipe area clean around torque converter, relief valve and all lines before installation.
Lightly coat new O-rings with clean oil before installation.
1.
Install two new O-rings (20) in relief valve (5) and position relief valve on torque divider.
2.
Secure relief valve (5) to torque divider with three washers (19) and capscrews (18).
3.
Install new O-ring (17) and elbow (16) in relief valve (5).
4.
Connect tube assembly (15) elbow (16).
5.
Install new O-ring (14) and elbow (13) in relief valve (5).
6.
Connect hose assembly (12) to elbow (13).
0119 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals