 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION OIL PUMP REPLACEMENT - CONTINUED
0118 00
REMOVAL - CONTINUED
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap lines and plug open-
ings after removing lines. Contamination of transmission could result in premature failure.
NOTE
Use a suitable container to capture any residual oil in lines. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag lines to ensure correct installation.
4.
Disconnect vent line (12) from elbow (13) on pump
22
23 13
(14). Remove elbow.
21 (HIDDEN)
14
5.
Remove four capscrews (15), washers (16), elbow
(17) and O-ring (18) from pump (14). Discard O-ring.
6.
Remove remaining elbows from pump (14).
7.
Remove two capscrews (19) and washers (20) from
12
pump (14).
8.
Remove pump (14) from flywheel housing (21).
Remove O-ring (22) and discard.
19,20
387-506
15,16 17,18
INSTALLATION
NOTE
Ensure all mating surfaces on pump and flywheel housing are clean and dry before installation.
Ensure splines on drive gear of oil pump are free of burrs.
Mesh splines on drive gear of oil pump with flywheel teeth. Ensure they mesh together smoothly.
Lightly coat new O-rings with clean oil before installation.
1.
Install new O-ring (22) and pump (14) on flywheel housing (21) with two washers (20) and capscrews (19).
2.
Install new O-ring (18) and elbow (17) to pump (14) with four washers (16) and capscrews (15).
0118 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals