 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION AND STEERING CLUTCH OIL FILTER ASSEMBLY MAINTENANCE- CONTINUED
0111 00
SERVICE - CONTINUED
2.
Remove cover (2). Remove O-ring (4) from cover.
Discard O-ring. Wipe cover clean with a rag.
5
3.
Remove filter element (5) from filter housing (3). Dis-
card filter element.
4.
Siphon transmission oil from filter housing (3). Wipe
housing clean with a rag.
5.
Install new filter element (5) into filter housing (3).
NOTE
2
Ensure O-ring groove is clean before
installation.
Lightly coat new O-ring with clean oil
4
before installation.
387-271
6.
Install new O-ring (4) onto cover (2).
7.
Install cover (2) to filter housing (3) with four bolts
(1).
2
1
3
387-269
8.
Check transmission oil level and add as needed (WP 0107 00).
REMOVAL
10
1.
Perform Service steps 1 through 6.
6,7
16,17
2.
Remove four bolts (6), washers (7), two flanges (8)
and hose assembly (9). Remove O-ring (10) from hose
3
assembly and discard.
8
3.
Remove four capscrews (11), washers (12) split flange
9
(13) and tube assembly (14). Remove O-ring (15)
from tube assembly and discard.
13
14
4.
Remove four nuts (16), washers (17) and filter hous-
15
11,12
387-272
ing (3) from machine.
0111 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals