 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
RANSMISSION OIL COOLER REPLACEMENT - CONTINUED
0109 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Use a suitable container to capture residual draining oil. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Step 1 is for winterized cab model only.
1.
Loosen clamp (1) and disconnect heater hose (2) from valve on top of head (3).
3
11
10
17
1
10
15
2
14
3
13
4
5
6
10
14
13
12
10
9
8
387-374
17
7
16
387-373
2.
Place a drain pan under oil cooler (4) to catch transmission oil.
3.
Remove drain plug (5) and washer (6) from oil cooler (4).
4.
Remove drain plug (7) and washer (8) from access cover (9).
5.
Loosen four clamps (10) and slide hoses (11 and 12) away from head (3).
CAUTION
Place protective caps or plugs on all transmission system openings to prevent foreign matter from contami-
nating system.
6.
Remove four capscrews (13) and lockwashers (14) and slide tubes (15 and 16) away from oil cooler (4). Remove and
discard O-rings (17) and lockwashers.
0109 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals