|
|
TM 5-2410-237-23
BACKUP ALARM SWITCH REPLACEMENT - CONTINUED
0099 00
REMOVAL - CONTINUED
NOTE
Tag wires to ensure correct installation.
3.
Disconnect switch connectors (6) from harness connectors (7).
4.
Drill out rivets (8) and remove switch (9). Discard rivets.
5.
Remove spring (10) from lever (11) and retainer (12).
6.
Remove nut (13) and retainer (12).
7.
Remove capscrews (14) and washers (15) and nuts (16) from both sides of guide (5). Remove bearings (17) and lever
(11).
8.
Drill out rivets (18) and remove actuator (19) from lever (11). Discard rivets.
9.
Remove screw (20), spacer (21), bumper (22), washer (23) and nut (24) from guide (5).
6,7
14,15
16
17
8,9
19
18
20
21
12
22
23
24
5
13 10
11
387-203
INSTALLATION
1.
Place screw (20) into position on guide (5) and attach spacer (21), bumper (22), washer (23) and nut (24).
2.
Install two new rivets (8) to secure switch (9) to guide (5).
3.
Install two new rivets (18) to secure actuator (19) to lever (11).
4.
Install retainer (12) to guide (5) with nut (13). Install spring (10) on lever (11) and retainer.
5.
Place lever (11) and bearings (17) into position and install capscrews (14), washers (15) and nuts (16).
6.
Connect switch connectors (6) to harness connectors (7).
0099 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |