 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
HORN REPLACEMENT - CONTINUED
0096 00
REMOVAL - CONTINUED
NOTE
Tag wires to ensure correct installation.
2.
Remove two capscrews (4) and disconnect wire har-
8,9
10
6
ness (5) and wire (6) from horn (7).
7
3.
Remove two capscrews (8) and lockwashers (9).
Remove horn bracket (10) with horn (7) from radiator
guard assembly. Discard lockwashers.
4
5
387-192
INSTALLATION
1.
Position horn (7) and horn bracket (10) on radiator guard assembly. Install two new lockwashers (9) and capscrews (8).
2.
Connect wire harness (5) and wire (6) to horn (7) and secure with two capscrews (4).
3.
Turn battery disconnect switch to ON position (TM 5-2410-237-10) and check operation of horn.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Radiator grille plate assembly weighs 60 lb (27 kg).
1,2
3
4.
Place upper radiator grille plate assembly (3) in posi-
tion and install four washers (2) and capscrews (1).
END OF WORK PACKAGE
387-191
0096 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals