|
|
TM 5-2410-237-23
HEADLAMPS, REAR FLOODLAMP AND GUARDS REPLACEMENT - CONTINUED
0093 00
REMOVAL - CONTINUED
8.
To remove headlamp guard (8) perform the following:
15
a.
Remove two bolts (12), lockwasher (13) and two
16
washers (14) from lower lip of guard (8). Discard
lockwasher.
b.
Remove four bolts (15), washers (16) and guard
12
(8) from top of radiator cover.
13
8
14
12
387-276
14
9.
To remove rear floodlamp protective cover (17), perform the following:
a.
Remove four capscrews (18), three lockwashers
18 19 20
(19) and four washers (20) from cover (12). Dis-
17
card lockwashers.
b.
Remove cover (17) from tractor.
387-266
INSTALLATION
1.
To install rear floodlamp protective cover (17), perform the following:
a. Position cover (17) on tractor.
b. Secure cover (17) with four capscrews (18). Three new lockwashers (19) and four washers (20).
2.
To install headlamp guard (8), perform the following:
a.
Install top leg of guard (18) on radiator cover with four bolts (15) and washers (16).
b.
Install two bolts (12), new lockwasher (13) and two washers (14) to radiator guard.
0093 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |