 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUSES REPLACEMENT - CONTINUED
0092 00
REMOVAL - CONTINUED
2.
Remove four capscrews (1), lockwashers (2), washers
5
4
1,2,3
(3) and cover (4) from top of dash assembly (5). Dis-
card lockwashers.
387-045
NOTE
If more than one fuse is to be replaced, tag wires to ensure correct installation.
3.
Push cap (7) against body (6) of fuse holder assembly and twist cap counterclockwise to open fuse holder assembly.
4.
Remove fuse (8) from body (6). Discard fuse.
INSTALLATION
1.
Place new fuse (8) of same type and rating in body (6)
8
6
7
of fuse holder assembly.
2.
Place cap (7) on body (6) aligning prongs of cap with
slots in body.
3.
Push fuse (8) down with cap (7) and turn cap clock-
wise.
387-725
4.
If removed, install cover (4) on top of dash assembly (5) with four washers (3), new lockwashers (2) and capscrews (1).
5.
Connect battery cables (WP 0101 00). Check operation of applicable circuit.
END OF WORK PACKAGE
0092 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals