|
|
TM 5-2410-237-23
60-AMP CIRCUIT BREAKER (STARTING/CHARGING CIRCUIT) REPLACEMENT - CONTINUED
0091 00
REMOVAL - CONTINUED
NOTE
Tag wires to ensure correct installation.
2.
Remove two nuts (6) and wires (7) from back of circuit breaker (8).
3.
Remove two screws (9) and circuit breaker (8) from back of dash panel (10).
INSTALLATION
1.
Install circuit breaker (8) in back of dash panel (10) with two screws (9).
2.
Install two wires (7) on back of circuit breaker (8) with nuts (6).
8
10
7
8
6
7
387-138
387-176
9
3.
Install cover (4) on top of dash assembly (5) with four capscrews (1), new lockwashers (3) and washers (2).
4.
Connect battery cables (WP 0101 00).
5.
Start engine. Starting/charging circuits operate prop-
5
4
1,2,3
erly when circuit breaker is functional (TM 5-2410-
237-10).
END OF WORK PACKAGE
387-045
0091 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |