 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
ETHER STARTING AID SWITCH REPLACEMENT - CONTINUED
0089 00
REMOVAL - CONTINUED
NOTE
Tag wires to ensure correct installation.
2.
Remove two screws (6) and wires (7) from back of ether aid start switch (8).
3.
Remove screw (9) and knob (10) from front of ether aid start switch (7).
4.
Remove nut (11) from front of ether aid start switch (7) and remove switch out through back of dash panel (12).
12
8
11
6
8
10
9
387-409
387-155
7
7
INSTALLATION
1.
Insert ether aid start switch (8) through back of dash panel (12).
2.
Install nut (11) on front of ether aid start switch (8).
3.
Install knob (10) with screw (9).
4.
Install two wires (7) to back of ether aid start switch
5
4
1,2,3
(8) with two screws (6).
5.
Install cover (4) on top of dash assembly (5) with four
capscrews (1), new lockwashers (3) and washers (2).
6.
Connect battery cables (WP 0101 00).
7.
Check ether aid start switch for proper operation (TM
5-2410-237-10).
387-045
END OF WORK PACKAGE
0089 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals