|
|
TM 5-2410-237-23
ENGINE WATER TEMPERATURE GAGE AND SENDING UNIT REPLACEMENT - CONTINUED
0084 00
REMOVAL - CONTINUED
2.
Remove three clamps (6) on sending unit line (7) to
9
8
water temperature sending unit (8).
6
7
3.
Using two wrenches, hold fitting (9) and remove water
temperature sending unit (8) from cylinder head.
387-145
4.
Remove grommet (10) from dash assembly (5).
10
5
387-146
5.
Remove two nuts (11), washers (12) and bracket (13) from back of water temperature gage (14).
NOTE
Do not attempt to separate water temperature sending unit from gage. They must be replaced as a unit.
6.
Remove water temperature gage (14) and sending unit (8) with preformed packing (15) out through front of dash assem-
bly (5).
7.
Remove preformed packing (15) from water temperature gage (14). Discard preformed packing.
0084 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |