 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
V-BELTS REPLACEMENT - CONTINUED
0074 00
INSTALLATION
NOTE
V-belts are replaced only as a matched set. Avoid mixing new and used belts.
1.
Loosely install two V-belts (5) on fan pulley (9).
2.
Position fan hub (6) against fan drive.
3.
Install six washers (8) and capscrews (7).
4.
Remove nylon sling and lifting device from fan hub (6).
6
9
4
3 2
7,8
5
5
387-560
1
387-568
ADJUSTMENT
NOTE
Belt tension gage indication should be 120 lb (534 N) for new V-belts and 90 lb (400 N) for used belts.
Belts are considered used if they have more than 30 minutes of operation.
1.
Turn nut (2) until correct tension on V-belts (5) is obtained.
2.
When correct belt tension is obtained, tighten nuts (1 and 3).
3.
Operate machine for 30 minutes and recheck belt tension. Adjust position of nut (2) as necessary.
4.
Install hood (WP 0159 00).
END OF WORK PACKAGE
0074 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals