 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WATER PUMP LINES REPLACEMENT - CONTINUED
0071 00
REMOVAL - CONTINUED
2.
Loosen two clamps (6) from hose (7).
NOTE
Perform step 3 only if tractor is equipped with a winterized cab.
3.
If equipped, disconnect heater hose (8) from elbow (5).
4.
Remove two capscrews (9) and capscrews (10 and 11).
5.
Carefully separate elbow (5) from engine and top of water pump (12) and remove hose (7).
6.
Remove gaskets (13 and 14) from mating surfaces. Discard gaskets.
7.
Loosen two clamps (15) and slide hose (16) off bottom of water pump (12).
13
6
7
6
11
10
5
9
8
5
14
15
12
16
15
387-979
INSTALLATION
NOTE
Ensure mating surfaces are clean and dry.
Use silicone gasket forming compound on mating surfaces to aid gasket placement and to seal between
components.
1.
Position hose (16) at bottom of water pump (12) and tighten two clamps (15).
2.
Install hose (7) on elbow (5).
0071 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals