 |
|||
|
|
|||
|
Page Title:
SECONDARY FUEL FILTER ASSEMBLY INSTALLATION |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
SECONDARY FUEL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0060 00
SECONDARY FUEL FILTER ASSEMBLY REMOVAL
1.
Remove fuel pressure gage (WP 0232 00).
2.
Remove filter element. See Filter Element Replacement in this work package.
3.
Disconnect fuel inlet line (4) from elbow (5).
4.
Remove elbow (5) from filter base (3). Remove and discard O-ring (6).
5.
Remove two capscrews (7) and washers (8).
6.
Remove filter base (3) and gasket (9). Discard gasket.
SECONDARY FUEL FILTER ASSEMBLY INSTALLATION
NOTE
Wipe all sealing surfaces clean and dry before installation.
1.
Install new gasket (9) and filter base (3) with two capscrews (7) and washers (8).
2.
Coat new O-ring (6) with clean fuel and install new
4
seal and elbow (5) to filter base (3).
5,6
3.
Connect fuel inlet line (4) to elbow (5).
4.
Install filter element. See Filter Element Replacement
in this work package.
5.
Install fuel pressure gage (WP 0232 00).
6.
Prime fuel system (WP 0041 00).
7.
Run engine and check for proper operation and fuel
9
leaks (TM 5-2410-237-10).
387-227
3
7,8
END OF WORK PACKAGE
0060 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals