 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
GOVERNOR CONTROLS AND LINKAGE MAINTENANCE - CONTINUED
0058 00
ADJUSTMENT
1.
Remove cover from top of dash assembly. See Removal, step 1.
2.
Loosen jam nuts (11) on rod (8) and remove cotter pin (6) and pin (7) at back end of rod assembly. Discard cotter pin.
3.
Adjust rod ends (12) until distance between center line
6,7
6,7
21.54 IN.
of holes in rod ends is 21.54 in. (547 mm).
(547 MM)
12
12
8
4.
Install rod (8) assembly with pin (7) and new cotter
pin (6) and tighten jam nuts (11).
11
387-432
5.
Loosen jam nut (42) on rod (30) and remove cotter pin
28,29
41
(28) and pin (29) on top end of rod assembly. Discard
cotter pin.
6.
Adjust rod ends (41) until distance between center line
of holes in rod ends is 23.50 in. (597 mm). Tighten
jam nut (42).
30
7.
Install pin (29) and new cotter pin (28).
23.50 IN.
(597 MM)
42
41
MOUNTED ON
FLYWHEEL
HOUSING
387-433
8.
Loosen jam nuts (55) on rod (24) and remove capscrew (22) and two nuts (21) from rod end (56).
9.
Adjust rod ends (56) until distance between center line
21,22
of holes in rod ends is 24.01 in. (610 mm).
10.
Install capscrew (22) and two nuts (21). Tighten jam
55
nuts (55).
56
DASH AREA 24.01 IN.
(610 MM)
DASH
ASSY
55,56 (HIDDEN)
24
MOUNTED ON
FLYWHEEL
HOUSING
387-434
0058 00-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals