|
|
TM 5-2410-237-23
FUEL DRAIN LINE AND DRAIN MECHANISM REPLACEMENT - CONTINUED
0054 00
REMOVAL - CONTINUED
5.
Remove elbow (8) from fuel tank (9). Remove O-ring (10) and strainer (11) from elbow. Discard O-ring.
6.
Remove nut (12) from threaded stud of ball joint (13). Remove ball joint assembly from drain lever (14).
NOTE
Note position of ball joints to ensure correct installation.
7.
Remove ball joints (7 and 13) and two nuts (15) from
32
31
rod (16).
30 29
8.
Remove spring (17) from pin (18).
9.
Remove capscrew (19), washer (20), drain lever (14),
23
spacer (22) and washer (23). Remove bushing (24)
22
from drain lever.
28
26
24
10.
Remove nut (25), two washers (26), bracket (27) and
capscrew (28) from drain lever (14).
17
11.
Remove two nuts (29), lockwashers (30), bracket (31)
27
18
13
and capscrews (32). Discard lockwashers.
26
15
25
INSTALLATION
1.
Install bracket (31) with two capscrews (32), new
14
lockwashers (30) and nuts (29).
20
2.
Install bracket (27) to drain lever (14) with capscrew
16
(28), two washers (26) and nut (25).
19
12
3.
Install bushing (24) in drain lever (14). Install drain
15
lever to bracket (31) with washer (23), spacer (22),
7
washer (20) and capscrew (19).
9
4.
Install spring (17) to pin (18).
11
5.
Install two nuts (15) and ball joints (7 and 13) to rod
10
(16).
8
6.
Place ball joint (13) in position on drain lever (14).
Install nut (12).
387-509
7.
Lightly coat new O-ring (10) with clean fuel and
install O-ring and strainer (11) on elbow (8). Install
elbow to bottom of fuel tank (9).
0054 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |