 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUEL LINES AND FITTINGS REPLACEMENT - CONTINUED
0053 00
REMOVAL - CONTINUED
19.
Remove bolt (35), two washers (36), nut (37) and clip
46
47
45
(38).
35 36
20.
Remove tube assembly (39) from elbows (40 and 41).
Remove tube assembly.
21.
Remove elbows (40 and 41) from connector (42) and
fuel transfer pump. Remove and discard O-ring (43).
22.
Remove connector (42) from primary fuel filter base.
38 36 37
FUEL
Remove and discard O-ring (44).
PRIMARY
TRANSFER
FUEL 44 42
PUMP
40
FILTER
39
43
41
387-558
23.
If required, remove bolt (45), washer (46) and bracket
50
48
(47).
52
24.
Disconnect tube assembly (48) from elbows (49 and
51
50).
49
25.
Remove elbows (49 and 50). Remove and discard O-
rings (51 and 52).
FUEL
TRANSFER
SECONDARY
PUMP
387-559
INSTALLATION
NOTE
Coat all new O-rings with clean fuel before installation.
1.
Place new O-ring (51) in position on elbow (49). Install elbow on fuel transfer pump. Place new O-ring (52) in position
on elbow (50). Install elbow on secondary fuel filter base.
2.
Connect tube assembly (48) to elbows (49 and 50).
3.
If removed, install bracket (47) with bolt (45) and washer (46).
4.
Place new O-ring (44) in position on connector (42). Install connector to primary fuel filter base.
5.
Install elbow (40) to connector (42).
6.
Place new O-ring (43) in position on elbow (41). Install elbow to fuel transfer pump.
7.
Connect tube assembly (39) to elbows (40 and 41).
8.
Place clip (38) around tube assembly (39) and align clip with bracket (47). Install bolt (35), two washers (36) and nut
(37).
0053 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals