 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUEL LINES AND FITTINGS REPLACEMENT - CONTINUED
0053 00
REMOVAL - CONTINUED
1.
Turn fuel shutoff valve (1) to OFF position.
1
387-213
2.
Remove three bolts (2), six washers (3), clamps (4) and three nuts (5).
3.
Remove three bolts (6), washers (7), small clip (8) and four large clips (9).
4.
Remove nut (10), washer (7) and two large clips (9).
CAUTION
Wipe area clean around all fuel connections to be opened during removal. Cap lines and plug openings after
removing lines. Contamination of fuel system could result in premature failure.
5.
Disconnect unions (11) from tube assemblies (12, 13 and 14).
6.
Disconnect tube assemblies (14 and 15) from elbows (16, 17 and 18).
7.
Disconnect elbows (16 and 17) from hose assembly (19).
8.
Remove elbow (18) from primary filter base. Remove and discard O-ring (20).
9.
Disconnect tube assembly (12) from fitting (21).
10.
Remove fitting (21) from fuel shut-off valve (1).
11.
Remove fuel shut-off valve (1) from elbow (22).
0053 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals