 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TURBOCHARGER OIL LINES AND FITTINGS REPLACEMENT - CONTINUED
0051 00
INSTALLATION
NOTE
Apply a light film of clean oil to new O-rings prior to installation.
1.
Install new O-ring (24) on connector (11) and install connector on support assembly (25).
2.
Install new O-rings (22 and 23) on support assembly (25).
3.
Place support assembly (25) in position on engine block and install two capscrews (18) and washers (19).
4.
Install capscrew (20) and washer (21).
5.
Place new gasket (17) in position on line (5).
6.
Place new seal (14) on line (3) and slide line into adapter (13).
7.
Place new gasket (15) on adapter (13) and new gasket (16) at the top of line (3).
8.
Place line (3) in position and install two capscrews (12).
9.
Place line (5) in position and tighten nut (10) to connector (11).
10.
Install two capscrews (4) to top of oil line (5).
4
11.
Install two capscrews (1) and washers (2).
12.
Place clips (9) in position on lines (3 and 5) and install
capscrew (7), two washers (8) and nut (6).
13.
Run engine and check for proper operation and oil
leaks (TM 5-2410-237-10).
1,2
3
5
9
387-185
6,7,8
END OF WORK PACKAGE
0051 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals