|
|
TM 5-2410-237-23
FUEL PRIMING PUMP REPLACEMENT - CONTINUED
0041 00
PRIMING FUEL SYSTEM
1.
Unscrew knob (7) on fuel priming pump (4) until it is
7
4
free to pump.
387-128
2.
Place suitable container under fuel system bleed valve
8
9
drain hose and open fuel system bleed valve (8).
3.
Pump several times. System is primed when fuel pres-
sure gage (9) returns to "0" immediately after pump-
ing has stopped and fuel flows from bleed valve (8)
without air bubbles. Tighten knob (7) and close bleed
valve (8).
4.
Run engine and check for proper operation and fuel
leaks (TM 5-2410-237-10).
END OF WORK PACKAGE
0041 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |