|
|
TM 5-2410-237-23
OIL SAMPLING VALVE AND HOSE REPLACEMENT - CONTINUED
0014 00
REMOVAL - CONTINUED
5.
Remove nut (10) from connector (11) and remove nut and reducer (7).
6.
Remove adapter (2) from connector (11).
15
14
16
7.
Remove nut (13) from connector (11) and remove
connector from bracket (14).
8.
Remove two capscrews (15), washers (16) and spacers
(17) from bracket (14) and remove bracket from cylin-
2
der head.
11
387-115
13
17
10
7
INSTALLATION
1.
Place spacers (17) and bracket (14) in position on cylinder head and install two washers (16) and capscrews (15).
2.
Place connector (11) in position on bracket (14). Install nut (13) to secure connector.
3.
Install adapter (2) onto connector (11).
4.
Place reducer (7) through nut (10) and install nut onto
7
1
3
2
6
connector (11).
5.
Install adapter (9) in engine block, if removed, and
secure elbow (5) onto adapter.
6.
Place hose (8) into position and install hose nut (4)
onto elbow (5). Install hose nut (6) onto end of reducer
(7).
7.
Lightly coat with oil and install new O-ring (3) onto
8
valve (1).
8.
Install valve (1) into adapter (2) and tighten valve to
15 lb-ft (20 Nm).
9.
Run engine and check for leaks (TM 5-2410-237-10).
9
387-114
5
4
END OF WORK PACKAGE
0014 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |