|
|
TM 5-2410-237-23
ENGINE OIL AND OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0011 00
OIL FILTER BASE DISASSEMBLY
WARNING
Covers hold springs under compression. Use care when removing them. Failure to follow this warning may
result in injury to personnel.
1.
Remove four capscrews (32), washers (33), two covers (34) and gaskets (35) from oil filter base (9). Discard gaskets.
2.
Remove springs (36) and plungers (37) from oil filter
38
base (9).
NOTE
9
Do not remove stud unless inspection
shows need for replacement.
37
3.
Remove plug (38). If damaged, remove stud (39) from
oil filter base (9).
36
OIL FILTER BASE ASSEMBLY
35
1.
Install plug (38) and, if removed, install stud (39) into
oil filter base (9).
39
2.
Install plungers (37) and springs (36) into oil filter
base (9).
3.
Place covers (34) with new gaskets (35) into position
and install four washers (33) and capscrews (32).
34
33
32
387-067
OIL FILTER BASE INSTALLATION
31
1.
Install new preformed packings (31) into oil filter base
(9).
9
387-066
0011 00-6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |