|
|
TM 5-2410-237-23
ENGINE OIL AND OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0011 00
CHANGING ENGINE OIL - CONTINUED
13.
Install access cover assembly (2) and tighten capscrew
(1).
1,2
387-059
OIL FILTER REPLACEMENT
1.
Drain engine oil. See Changing Engine Oil in this work package.
NOTE
Place a 2 quart drain pan under filter to catch any oil.
2.
Use a strap wrench to remove oil filter (10). Discard
9
filter.
3.
Clean bottom of oil filter base (9) with a clean rag.
4.
Apply a thin film of clean lubricating oil to gasket on
base of new oil filter (10).
5.
Install new oil filter (10) and tighten only until gasket
on base of filter touches oil filter base (9), then tighten
filter an additional 3/4 turn. Do not overtighten.
6.
Fill crankcase with oil. See Changing Engine Oil in
this work package.
10
387-064
OIL FILTER BASE REMOVAL
1.
Drain engine oil. See Changing Engine Oil in this work package.
2.
Remove oil filter. See Oil Filter Replacement in this work package.
NOTE
Place drain pan under oil filter base.
3.
Remove capscrew (11) that holds clamp (12), washer (13) and spacer (14).
0011 00-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |