|
| |
TM5-2410-237-10
3-6.
RADIATOR - INSPECT.
c. Remove radiator cap (2) slowly to relieve
pressure.
d. Coolant level should be within 1/2 inch of
bottom of fill pipe.
e. When operating above 32°F use clean
water that is low in minerals to fill
radiator.
f. When operating below 32°F (0°C), add
appropriate antifreeze solution to provide
protection to the lowest expected
ambient temperature. Refer to
Appendix D.
g. Install cap (2), lift tab (3) and install
padlock (1) through the hole in cap (2).
3-9
|
