|
| |
SECTION I
TM 5-2410-236-24P
5.Special Information.
Use the following subparagraphs as applicable:
a. USABLE ON CODE. The usable on code
appears in the lower left corner of the Description
Column heading. Usable on codes are shown as "UOC:
in the Description Column Justified left) on the first line
following applicable item description/nomenclature.
Uncoded items are applicable to all models.
Identification of the usable on codes used in the RPSTL
are:
Code
Used On
AGS
D5BNS
AGT
D5BS
AGU
D5BS1
AGV
D5BNS1
b.
FABRICATION
INSTRUCTIONS.
Bulk
materials required to manufacture items are listed in the
Bulk Material Functional Group of this RPSTL. Part
numbers for bulk materials are also referenced in the
description column of the line item entry for the item to
be
manufactured/fabricated.
Detailed
fabrication
instructions for items source coded to be manufactured
or fabricated are found in TM 5-2410-236-24.
c.
ASSEMBLY
INSTRUCTION.
Detailed
assembly instructions for items source coded to be
assembled from component spare/repair parts are found
in TM 5-2410-236-24. Items that make up the assembly
are listed immediately following the assembly item entry
or reference is made to an applicable figure.
d. KITS. Line item entries for repair parts kits
appear in group 9401 in Section II.
e. INDEX NUMBERS. Items which have the
word BULK in the figure column will have and index
number shown in the item number column. This index
number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in
Section II.
f.
ASSOCIATED
PUBLICATIONS.
The
publications listed below pertain to the Tractor, Full
Tracked and its components:
Publication
Short Title
TM 5-2410-236-10
Tractor, Full Tracked
TM 5-2410-236-24
Tractor, Full Tracked
6. How to Locate Repair Parts.
a. When National Stock Number or Part Number
is Not Known.
(1) First. Using the table of contents, determine
the assembly group or subassembly group to which the
item belongs. This is necessary since figures are
prepared for assembly groups and subassembly groups,
and listings are divided into the some groups.
(2) Second. Find the figure covering the
assembly group or subassembly group to which the item
belongs.
(3) Third. Identify the item on the figure and use
the Figure and Item Number Index to find the NSN.
b. When National Stock Number or Part Number is
Known.
(1) First. Using the National Stock Number or the
Part Number Index, find the pertinent National Stock
Number or Part Number. The NSN index is in National
Item Identification Number (NIIN) sequence (see 4.a(1)).
The part numbers in the Part Number index are listed in
ascending alphanumeric sequence (see 4.b). Both
indexes cross-reference you to the illustration/figure and
item number of the item you are looking for.
(2) Second. Turn to the figure and item number,
verify that the item is the one you’re looking for, then
locate the item number in the repair parts list for the
figure.
7. Abbreviations.
For standard abbreviations see MIL-STD-1 2D, Military
Standard
Abbreviations
For
Use
On
Drawings,
Specifications, Standards And In Technical Documents.
5
|
