|
| |
SECTION I
TM 5-2410-236-24P
(1) Source Code. The source code tells you how
to get an item needed for maintenance, repair or
overhaul of an end item/equipment. Explanations of
source codes follows:
Code
Application/Explanation
PA
Stocked items; use the applicable NSN to
PB
request/requisition items with these
PC**
source codes. They are authorized to the
PD
category indicated by the code entered in
PE
3d position of the SMR code.
PF
PG
**Items coded PC are subject to deterioration.
KD
Items with these codes are not to be
KF
requested/requisitioned individually. They
KB
are part of a kit which is authorized to the
maintenance category indicated in the
3d
position of the SMR code. The complete kit must
be requisitioned and applied.
MO-(Made at UM
Items with these codes are not
A VUM Level)
to be requested/ requisitioned
MF-(Made at DS/
individually. They must be made
AVUM Level)
from bulk material which is identified
by
the
part
number
in
the
DESCRIPTION AND USABLE ON
CODE (UOC) column and listed in
the Bulk Material group
ML-(Made at
of the repair parts list in this
Specialized Repair RPSTL. If the item is authorized
Act (SRA))
to you by the 3d position code of the
SMR code, but if the
MD-(Made at
source code indicates it is made
Depot)
at a higher level, order the item
from
the
higher
level
of
maintenance.
AO-(Assembled by Items with these codes are not
UM/AVUM Level)
to
be
requested/requisitioned
individually
The parts that
AF-(Assembled by
make up the assembled item
DS/A VIM Level)
must
be
requisitioned
or
fabricated
and
assembled at the level
AH-(Assembled by of maintenance indicated by
GS Category)
the
source
code. If the 3d position code of the
SMR code by
AL-(Assembled by
authorizes you to replace the
SRA)
item, but the source code indi-
AD-(Assembled
cates the item is assembled at a
by Depot)
bled at a higher level,
order the item from the higher level
of maintenance.
XA-
Do not requisition an "XA"-coded Item.
Order its next higher assembly. (Also,
refer to the NOTE below.)
XB-
If an "XB" item is not available from
salvage order it using the CAGE and
part number given
XC-
Installation drawing, diagram, instruction
sheet, field service drawing, that is
identified by the manufacturer’s part
number.
XD-
Item is not stocked. Order an "XD"-
coded
item
through
normal
supply
channels using the CAGE and part
number given, if no NSN is available.
NOTE: Cannibalization or controlled exchange, when
authorized, may be used as source of supply for items
with the above source codes, except for those source
coded "XA" or those aircraft support items restricted by
requirements of AR 70042.
(2) Maintenance Code. Maintenance codes tell
you the level(s) of maintenance authorized to USE and
REPAIR support items. The maintenance codes are
entered in the third and fourth positions of the SMR Code
as follows:
(a) The maintenance code entered in the
third position tells you the lowest maintenance level
authorized to remove, replace and use an item. The
maintenance code entered in the third position will
indicate authorization to one of the following levels of
maintenance:
Code
Application/Explanation
C -
Crew or operator maintenance done within unit
or aviation unit maintenance.
O -
Unit maintenance or aviation unit category can
remove, replace and use the item.
F -
Direct support or aviation intermediate level can
remove, replace and use the item.
H -
General support level can remove, replace and
use the item.
L -
Specialized repair activity can remove, replace
and use the item.
2
|
