Special Information.

TM 5-2410-235-24P

sequence. The NIIN consists of the last nine

(2) ITEM column. The item number is that

NSN

number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

STOCKNUMBER column. This column lists the

(3)

digits of the NSN (i.e., 5305-01-674-1467). When

NSN for the item.

NIIN

(4) CAGEC column. The Commercial and

using this column to locate an item, ignore the first 4

Government Entity (CAGE) Code (C) is a 5-digit

digits of the NSN. However, the complete NSN should

alphanumeric code used to identify the manufacturer,

be used when ordering items by stock number.

distributor, or Government agency, etc., that supplies the

item.

(5) PART NUMBER column. Indicates the

(2) FIG. column. This column lists the

number of the figure where the item is identified/located.

primary number used by the manufacturer (individual,

The figures are in numerical order in Section II and

firm, corporation, or Government activity), which controls

Section III.

the design and characteristics of the item by means of its

(3) ITEM column. The item number identifies

engineering drawings, specifications standards and

the item associated with the figure listed in the adjacent

inspection requirements to identify an item or range of

FIG. column. This item is also identified by the NSN

items.

listed on the same line.

Special Information.

b. PARTNUMBER INDEX. Part numbers in this

a. USABLE ON CODE. The usable on code

index are listed by part number in ascending

appears in the lower left comer of the Description column

alphanumeric sequence (i.e., vertical arrangement of

heading.

letter and number combination which places the first

b. FABRICATION INSTRUCTIONS. Bulk materials

letter or digit of each group in order A through Z, followed

required to manufacture items are listed in the Bulk

by the numbers 0 through 9 and each following letter or

Material Functional Group of this RPSTL. Part numbers

digit in like order).

for bulk materials are also referenced in the Description

(1) CAGEC column. The Commercial and

column of the line item entry for the item to be

Government Entity (CAGE) Code (C) is a 5-digit

manufactured/fabricated. Detailed

fabrication

alphanumeric code used to identify the manufacturer,

instructions for items source coded to be manufactured

distributor, or Government agency, etc., that supplies the

or fabricated are found in TM 5-2410-235-24.

item.

c. ASSEMBLY

INSTRUCTIONS.

Detailed

(2) PART NUMBER column. Indicates the

assembly instructions for items source coded to be

primary number used by the manufacturer (individual,

assembled from component spare/repair parts are found

firm, corporation, or Government activity), which controls

in TM 5-2410-235-24. Items that make up the assembly

the design and characteristics of the item by means of its

are listed Immediately following the assembly item entry

engineering drawings, specifications standards, and

or reference is made to an applicable figure.

Inspection requirements to identify an item or range of

d. KITS. Line item entries for repair parts kits

items.

appear in group 9401 in Section II.

(3) STOCKNUMBER column. This column

e. INDEX NUMBERS. Items which have the word

lists the NSN for the associated part number and

BULK in the figure column will have an index number

manufacturer identified in the PART NUMBER and

shown in the item number column. This index number is

CAGE columns to the left.

a cross-reference between the National Stock

(4) FIG. column. This column lists the

Number/Part Number Index and the bulk material list in

number of the figure where the item is identified/located

Section II.

in Sections 1i and Ill.

(5) ITEM column. The item number is that

f. ASSOCIATED

PUBLICATIONS.

The

number assigned to the Item as it appears in the figure

publications listed below pertain to the Crawler Tractor

referenced in the adjacent figure number column.

and its components:

c. FIGURE AND ITEM NUMBER INDEX.

(1) FIG. column. This column lists the

Publication

Short Title

number of the figure where the item is identified/located

TM 5-2410-235-10

Tractor, Crawler: JD 550C

Sections

and

Ill.

TM 5-2410-235-24

Tractor, Crawler: JD 550C

SOMARPI 5-2410-235

Tractor, Crawler: JD 550C