|
|
TM 5-2410-235-24P
XC -
Installation drawing, diagram, instruction
Code
Application/Explanation
sheet, field service drawing, that is
PA
Stocked items; use the applicable PB
identified by the manufacturer's part
NSN to request/requisition items PC**
number.
with these source codes. They are PD
XD -
Item is not stocked. Order an "XD"-coded
authorized to the category
item through normal supply channels
PE
indicated by the code entered in the 3d
using the CAGE and part number given, if
position of the SMR code.
no NSN is available.
PF
** Items coded PC are subject PG
to deterioration.
NOTE: Cannibalization or controlled exchange, when
Items with these codes are not to KD
authorized, may be used as a source of supply for items
be requested/requisitioned
with the above source codes, except for those source
KF
individually. They are part of a kit KB
coded "XA' or those aircraft support items restricted by
which is authorized to the
requirements of AR 70042.
maintenance category Indicated in the
(2) Maintenance Code Maintenance codes tell you the
3d position of the SMR code. The complete kit must be
level(s) of maintenance authorized to USE and REPAIR
requisitioned and applied.
support items The maintenance codes are entered in the
third and fourth positions of the SMR code as follows:
MO-(Made at UMI
Items with these codes are not to
(a) The maintenance code entered in the third position
AVUM Level)
be requested/requisitioned
tells you the lowest maintenance level authorized to
MF-(Made at DSI
Individually. They must be made
remove, replace, and use an item. The maintenance
AVUM Level)
from bulk material which is
code entered in the third position will indicate
MH-(Made at GS
identified by the part number in
authorization to one of the following levels of
Level )
the DESCRIPTION AND USABLE
maintenance.
ON CODE (UOC) column and
Code
Application/Explanation
ML-(Made at Spe-
listed in the Bulk Material group
C-
Crew or operator maintenance done within
cialized Repair
of the repair parts list in this
unit maintenance or aviation unit
Activity (SRA))
RPSTL. If the item is authorized
maintenance.
MD-(Made at
to you by the 3d position code of
O-
Unit maintenance or aviation unit category
Depot)
the SMR code, but the
can remove, replace, and use the item.
source code indicates it is made
F-
Direct support or aviation intermediate level
at a higher level, order the item
can remove, replace, and use the item.
from the higher level of
H-
General support level can remove, replace,
maintenance. Items with these
and use the item.
codes are not to be
L-
Specialized repair activity can remove,
requested/requisitioned
replace, and use the item.
AO-(Assembled by
individually. The parts that make
D-
Depot level can remove, replace, and use the
UMI AVUM
up the assembled item must be
item.
Level)
requisitioned or fabricated and
(b) The maintenance code entered in the fourth position
AF-(Assembled by
assembled at the level of
tells whether or not the item is to be repaired and
DSIAVIM
maintenance indicted by the
identifies the lowest maintenance level with the capability
Level)
source code. If the 3d position
to do complete repair (i.e., perform all authorized repair
AH-(Assembled by
code of the SMR code
functions). (NOTE: Some limited repair may be done on
GS Category)
authorizes you to replace the
the item at a lower level of maintenance, if authorized by
item, but the source code
the Maintenance Allocation Chart (MAC) and SMR
AL-(Assembled by
indicates the item is assembled
codes.) This position will contain one of the following
SRA)
at a higher level, order the item
maintenance codes:
AD-(Assembled by
from the higher level of
Code
Application/Explanation
Depot)
maintenance.
O-
Unit maintenance or aviation unit is the
lowest level that can do complete repair of the item.
XA -
Do not requisition an "XA'-coded item.
F-
Direct support or aviation intermediate is
Order its next higher assembly. (Also
the lowest level than can do complete repair of the item.
refer to the NOTE following.)
XB -
If an "XB" item is not available from
salvage, order it using the CAGE and part
number given.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |