|
|
Key to figure 6-59.
remove the No. 4 inner planet gears (5) together
1 Planet gear shaft
with the bearings and washers.
2 Ball
NOTE
3 Planet gear shafts
Use care to
avoid loss of the balls (4) and (9) in the
4 Ball
planet gear
shafts (2)anf (8). Two bearings (7) and
5 No. 2 outer planet gear
two washers
(6), one on either side of each planet gear,
6 No. 1 planet gear
are provided
with each planet gear in the carrier.
7 No. 3 planet gear
(4) The No. 4 outer planet gears (10) complete
9 No. 2 inner planet gear
with bearings and washers can be removed after
No. Washer
10
removing the planet gear shafts (8).
(5) Inspect all gears, bearings, washers and
i. No. 2 Carrier Disassembly and Assembly.
s h a f t s in the carrier and replace any that are worn
( 1 ) Position the No. 2 carrier (1, fig. 6-60) as
or damaged.
shown.
(6) Assemble the carrier in the reverse order of
( 2 ) Pull the planet gear shafts (2) part of the
d i s a s s e m b l y making certain the ball is in place in
w a y out of the carrier and remove the No. 5 planet
each planet gear shaft and correctly aligned with
gears (3), washers (6) and bearings (7).
the notch in the carrier.
(3) Pull the shafts (2) from the carrier and
6-53
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |