SPECIAL INFORMATION - TM-5-2410-233-23P0020

TM 5-2410-233-23P

FIELD MAINTENANCE (UNIT AND DIRECT SUPPORT MAINTENANCE) REPAIR PARTS AND

SPECIAL TOOLS LISTS (RPSTL) ALSO INCLUDES SUSTAINMENT MAINTENANCE

(GENERAL SUPPORT AND DEPOT MAINTENANCE INTRODUCTION - CONTINUED

0001 00

SPECIAL INFORMATION - CONTINUED

Cancelled and Replaced By Part Numbers. Caterpillar implements a Modernization through Spares program for

its equipment through the use of cancelled and replaced by part numbers. If the part number you ordered has been

cancelled and replaced by a new part, the new part will be automatically shipped to you. Install this new part; DO

NOT return it.

Usable On Code (UOC). The UOC appears in the lower left corner of the DESCRIPTION column heading.

Usable on codes are shown as "UOC:" in the Description Column (justified left) on the first line under the applica-

ble item/nomenclature. Uncoded items are applicable to all models. Identification of the UOC's used in the RPSTL

are:

Code

Used On

BSS

Engine, Diesel, Model D333, 5R0829

BST

Engine, Diesel, Basic Ether Start, Model 3306, 5R8356

BSW

Model D7F w/Winch and ROPS

BSX

Model D7F w/Ripper and ROPS

BSY

Engine, Diesel, Direct Inj., Model 3306, 5R7757

BSZ

Engine, Diesel, Ether Start, Model 3306, 5R8357

Fabrication Instructions. Bulk materiels required to manufacture items are listed in the Bulk Materiel functional

group of this RPSTL. Part numbers for bulk materiel are also referenced in the Description Column of the line item

entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be

manufactured or fabricated are found in TM 5-2410-233-23.

Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the

item number column. This index number is a cross-reference between the NSN/P/N Index work package and the

bulk materiel list in the repair parts list work package.

Associated Publications. The publication(s) listed below pertain to the D7F Tractor and its components:

Publication

Short Title

TM 5-2410-233-10 . . . . . . . . . . . . . . . . . . . . Operator's Manual for Tractor, Full Tracked, Low Speed

TM 5-2410-233-23 . . . . . . . . . . . . . . . . . . . . Field Maintenance Manual for Tractor, Full Tracked, Low

Speed

HOW TO LOCATE REPAIR PARTS

When National Stock Number is Known:

(1)

First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The

NSN is arranged in NIIN sequence. Note the figure and item number next to the NSN.

(2)

Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.

When Part Number is Known:

(1)

First. If you have the P/N and not the NSN, look in the PART NUMBER column of the P/N index work

package. Identify the figure and item number.

(2)

Second. Look up the item on the figure in the applicable repair parts list work package.

0001 00-6