 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
HYDRAULIC TANK REPLACEMENT - CONTINUED
0166 00
INSTALLATION
CAUTION
Wipe area clean around openings in tank and hydraulic lines before installation, to ensure contamination
does not enter hydraulic system.
1.
If removed, install two lifting links with 1/2 -13 x 1in. bolts in threaded holes (A) in top of hydraulic tank (7).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Hydraulic tank weighs is 248 lb (113 kg).
2.
Attach a nylon sling to lifting links on hydraulic tank (7).
3.
Use nylon sling and lifting device to position hydraulic tank (7) on fender, with mounting holes in tank aligned with
holes in fender.
4.
Secure hydraulic tank (7) to fender with four new lockwashers (25) and capscrews (24).
NOTE
Perform steps 5 and 6 only if machine is equipped with a ripper.
Lightly coat new O-rings with clean oil before installation.
5.
Install new O-rings (21) to ripper cylinder oil lines
20
7
(20).
6.
Install ripper cylinder oil lines (20) to hydraulic tank
21
(7) with four split flanges (19), eight new lockwashers
(HIDDEN)
(18) and capscrews (17).
386-754
19
17,18
21 (HIDDEN)
0166 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals