REMOVAL - TM-5-2410-233-230802

TM 5-2410-233-23

HYDRAULIC TANK REPLACEMENT - CONTINUED

0166 00

REMOVAL

CAUTION

Install protective caps and plug openings in tank and hoses after removal of hydraulic hoses, to ensure con-

tamination does not enter hydraulic system.

NOTE

Use a suitable container to capture any residual oil that may drain from hoses as they are dis-

connected. Dispose of oil IAW local policy and ordinances. Ensure all spills are cleaned up.

Tag hoses as they are removed to ensure correct installation.

Remove six capscrews (1), lockwashers (2) and washers (3) from front, middle and rear guards (4, 5 and 6) and hydrau-

lic tank (7). Remove guards and discard lockwashers.

Remove four capscrews (8) and washers (9) from hydraulic tank (7).

Install two lifting links with 1/2 -13 x 1 in. bolts in threaded holes (A) on top of hydraulic tank (7).

386-674

0166 00-2