 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE LIFT CYLINDER REPLACEMENT - CONTINUED
0157 00
REMOVAL - CONTINUED
NOTE
Tag all hydraulic hoses to ensure correct installation.
Use a suitable container to capture any oil that may drain from system. Dispose of oil IAW
local policy and ordinances. Ensure all spills are cleaned up.
1.
Remove four bolts (1), lockwashers (2), two split flanges (3), tube (4) and O-ring (5) from lift cylinder (6). Discard O-
ring.
2.
Repeat step 1 at the other end of tube (4) and remove tube from manifold (7).
3.
Repeat steps 1 and 2 to remove tube (8).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Lift cylinder weighs 242 lb (110 kg).
4.
Attach a nylon sling and a suitable lifting device to
8
5 (HIDDEN)
6
1,2,3
upper part of lift cylinder (6).
4
7
386-805
0157 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals