ASSEMBLY - TM-5-2410-233-230748

TM 5-2410-233-23

BLADE TILT CYLINDER REPAIR - CONTINUED

0155 00

CLEANING AND INSPECTION

WARNING

Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-

rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-

lated areas. Keep away from open flames and other sources of ignition.

Clean all sealing surfaces and tube assembly connections with solvent cleaning compound and allow to dry.

Inspect internal casing of cylinder and internal parts of cylinder for cracks, wear, scoring or other damage. If compo-

nents are not serviceable, replace tilt cylinder.

Ensure mating surfaces for bearing sleeves are clean and not damaged.

ASSEMBLY

NOTE

Lightly coat bearing sleeves, new O-rings, new backup, new piston ring and new seals with

clean oil before assembly.

Ensure new seals face toward cylinder housing when installed.

Install new piston ring (16), new seals (14 and 15) and washer (13) on piston (7).

386-607

0155 00-4