 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
HYDRAULIC PUMP REPLACEMENT - CONTINUED
0148 00
INSTALLATION
CAUTION
Wipe all sealing surfaces and hose connections clean and dry prior to installation. Contamination of
hydraulic system could result in premature failure.
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Install new O-ring (18) on hydraulic pump (12).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
CAUTION
Ensure splines on pump shaft are aligned with internal splines on engine auxiliary drive gear.
NOTE
Hydraulic pump weighs 50 lb (23 kg).
2.
Attach a nylon sling and a suitable lifting device to
hydraulic pump (12) and lift assembly into position on
engine auxiliary drive cover.
3.
Secure hydraulic pump (12) on engine auxiliary drive
cover with two flatwashers (17) and capscrews (16).
386-664
12
16,17
0148 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals