 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
SEAT, SEAT BELT AND SEAT BASE ASSEMBLY REPLACEMENT - CONTINUED
0137 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Seat base assembly weighs 85 lb (39 kg).
2.
Attach nylon slings and a suitable lifting device to seat base assembly (5).
3.
Lift seat base assembly (5) into position on tractor. Leave lifting equipment attached.
NOTE
Do NOT tighten seat base mounting bolts until all have been loosely installed.
4.
Install six washers (14), new lockwashers (13) and bolts (12) to seat base assembly (5).
5.
Remove nylon slings and lifting device from seat base assembly (5).
6.
Install each seat belt (11) to seat base assembly (5) with eyebolt (10) and nut (9).
7.
Pull battery cables through seat base assembly (5).
SOUND
SUPPRESSION
9,10
11
PAD
12,13,14
5
386-769
12,13,14
0137 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals