 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ROPS SUPPORT PADS AND MOUNTING PLATES REPLACEMENT - CONTINUED
0132 00
REMOVAL
1.
Remove capscrew (1) and lockwasher (2) from grabhandle (3) at rear of machine. Discard lockwasher.
2.
While supporting grabhandle (3), remove two nuts (4), four washers (5), two lockwashers (6), capscrews (7) and remove
grabhandle from R.H. plate (8). Discard lockwashers.
NOTE
Removal of L.H. and R.H. plate is the same. R.H. plate is shown.
3.
Remove two nuts (9), lockwashers (10), capscrews (11), and washers (12) from angle bracket (13) and fender. Discard
lockwashers.
4.
Remove six nuts (14), lockwashers (15), capscrews (16), washers (17) and remove R.H. plate (8) from right rear of
machine. Discard lockwashers.
5.
Remove two nuts (18), lockwashers (19), capscrews (20), washers (21) and angle bracket (13) from R.H. plate (8). Dis-
card lockwashers.
15 14
8
18
3
19
8
13
11
17
16
1,2
12
10
9
21
386-453
20
4,5,6,7
386-452
0132 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals