 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION AND STEERING CLUTCH OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED 0089 00
DISASSEMBLY
1.
Use a hammer and punch to remove pin (19) from
27
tube (20).
28
2.
Remove tube (20), recessed washer (21), spring (22)
and valve seat (23) from cover (2).
2
3.
Remove retainer (24), spring (25) and sleeve spacer
(26) from filter housing (3).
4.
Remove plug (27) and O-ring (28) from cover (2).
Discard O-ring.
5.
Remove plug (29) and seal (30) from bottom of filter
23
housing (3). Discard seal.
6.
If necessary, remove four studs (31) from filter
22
26
housing (3).
21
ASSEMBLY
24
1.
If removed, install four studs (31) into filter housing
(3).
20
25
NOTE
Lightly coat new seal and new O-ring with
19
clean oil before installation.
3
2.
Install new seal (30) and drain plug (29) to bottom of
filter housing (3).
30
3.
Install new O-ring (28) and plug (27) to cover (2).
4.
Install sleeve spacer (26), spring (25) and retainer (24)
31
into filter housing (3).
386-727
5.
Install valve seat (23), spring (22), recessed washer
(21) and tube (20) onto cover (2).
29
NOTE
Ensure pin is not damaged. If damaged, it must
be replaced.
6.
Install pin (19) into tube (20).
0089 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals