 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION ASSEMBLY SERVICE - CONTINUED
0086 00
SERVICE - CONTINUED
NOTE
Use a suitable container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all
spills are cleaned up.
2.
Remove bevel gear drain plug (3) and steering clutch
drain plugs (4) and allow transmission oil to drain.
3.
Remove breather and clean (WP 0099 00).
386-331
4
4
3
4.
Install breather (1) and tighten (WP 0099 00).
5.
Drain transmission oil cooler (WP 0087 00).
6.
Remove plug from flywheel housing and drain oil (WP 0085 00).
7.
Replace transmission and steering clutch oil filter assembly (WP 0089 00).
8.
Remove, clean and reinstall transmission oil magnetic
2
screen assembly and torque divider suction screen
9.
Install bevel gear drain plug (3) and steering clutch
drain plugs (4).
10.
Reinstall drain plug at transmission oil cooler (WP
1
NOTE
Refer to KEY in WP 0008 00 for appro-
priate grade of oil to add based on
expected temperature range of operation.
11.
Fill transmission with oil through fill tube (1).
12.
Install fill tube cap (2).
13.
Start engine and allow to warm up.
386-016
14.
Check for transmission oil leaks (TM 5-2410-233-10).
15.
Remove transmission oil level gage and check level. Oil should be at FULL mark on transmission oil level gage. Add oil
as needed. Shut down engine.
END OF WORK PACKAGE
0086 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals