 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BACKUP ALARM REPLACEMENT - CONTINUED
0078 00
REMOVAL
WARNING
Ensure battery disconnect switch is in the OFF position before replacing backup alarm. Failure to follow
this warning could result in injury or damage to equipment.
1.
Remove two nuts (1), lockwashers (2), washers (3) and capscrews (4) that hold alarm (5) to bracket (6). Discard lock-
washers.
NOTE
Tag wires to ensure correct installation.
2.
Disconnect two wires (7) from back of alarm (5).
3.
Remove alarm (5) from bracket (6).
4.
To remove bracket (6) from rear plate, remove two nuts (8), washers (9), clamp (10), two capscrews (11) and ground
wire (12).
4
5
7
11
10
6
12
3
2
1
8
9
401-446
INSTALLATION
1.
Position bracket (6) on rear plate and install ground wire (12), clamp (10), two capscrews (11), washers (9) and nuts (8).
2.
Connect two wires (7) to back of alarm (5).
3.
Place alarm (5) in position on bracket (6) and install two capscrews (4), washers (3), new lockwashers (2) and nuts (1).
4.
Turn battery disconnect switch to ON position (TM 5-2410-233-10).
5.
Check backup alarm for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0078 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals