 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
OIL PRESSURE BYPASS SWITCH AND GAGE REPLACEMENT - CONTINUED
0077 00
REMOVAL - CONTINUED
NOTE
Tag wires to ensure correct installation.
2.
Remove two screws (6), washers (7) and wires (8) from oil pressure switch (9).
3.
Remove oil pressure switch (9).
NOTE
If oil pressure gage removal is required, continue with steps 5 through 7.
4.
Remove two nuts (10), flatwashers (11), lockwashers (12) and bracket (13) from back of oil pressure gage (14). Discard
lockwashers.
5.
Slide oil pressure gage (14) with seal (15) out through front of dash assembly (5).
6.
Remove seal (15) from oil pressure gage (14). Discard seal.
9
5
10
15
11
12
8
13
14
7
8 6
386-518
INSTALLATION
NOTE
If oil pressure gage was removed, perform steps 1 through 3.
1.
Install new seal (15) on oil pressure gage (14).
2.
Install oil pressure gage (14) into position on dash assembly (5).
3.
Install bracket (13), two new lockwashers (12), flatwashers (11) and nuts (10) to back of oil pressure gage (14).
4.
Install oil pressure switch (9) and tighten.
5.
Connect wires (8) to oil pressure switch (9) with two washers (7) and screws (6).
0077 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals