 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ETHER STARTING AID SWITCH REPLACEMENT - CONTINUED
0075 00
REMOVAL - CONTINUED
2.
Remove cover (6), button assembly (7) and nut (8) from front of ether starting aid switch (9). Remove switch from back
of dash assembly (5).
NOTE
Tag wires to ensure correct installation.
3.
Remove two nuts (10), lockwashers (11) and wires (12) from back of ether starting aid switch (9). Discard lockwashers.
5
5
10
12
11
9
7
8
6
386-466
6,7,8
386-523
INSTALLATION
1.
Install two wires (12) to back of ether starting aid switch (9) with two new lockwashers (11) and nuts (10).
2.
Insert ether starting aid switch (9) through back of
5
4
1,2,3
dash assembly (5).
3.
Install nut (8), button assembly (7) and cover (6) on
front of ether starting aid switch (9).
4.
Install cover (4) on top of dash assembly (5) with four
capscrews (1), washers (2) and new lockwashers (3).
5.
Connect battery cables (WP 0080 00).
6.
Turn battery disconnect switch to ON position (TM 5-
2410-233-10).
7.
Check ether starting aid switch for proper operation
(TM 5-2410-233-10).
386-651
END OF WORK PACKAGE
0075 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals