 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ENGINE START SWITCH REPLACEMENT - CONTINUED
0074 00
REMOVAL - CONTINUED
2.
Remove screw (6) and lockwasher (7) from engine start switch knob (8). Discard lockwasher.
3.
Remove nut (9).
14
4.
If damaged, remove four screws (10) and remove plate
15
(11).
16
12
5.
Remove engine start switch (12) through back of dash
panel (13).
11
NOTE
9
8
Tag wires to ensure correct installation.
7
6.
Remove two nuts (14) and lockwashers (15) from
13
back of engine start switch (12). Discard lockwashers.
7.
Disconnect two wires (16) from engine start switch
386-652
10
6
(12).
INSTALLATION
1.
Connect two wires (16) to engine start switch (12) with two new lockwashers (15) and nuts (14).
2.
If removed, install plate (11) with four screws (10).
3.
Position engine start switch (12) in dash panel (13) and install nut (9).
4.
Install engine start switch knob (8) with new lockwasher (7) and screw (6).
5.
Install cover (4) on top of dash assembly (5) with four
5
4
1,2,3
capscrews (1), new lockwashers (3) and washers (2).
386-651
6.
Connect battery cables (WP 0080 00).
7.
Turn battery disconnect switch to ON position (TM 5-2410-233-10).
8.
Start engine and verify switch operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0074 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals