 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
V-BELTS REPLACEMENT - CONTINUED
0069 00
INSTALLATION
NOTE
V-belts are replaced only as a matched set. Avoid mixing new and used belts.
1.
Loosely install three V-belts (5) on fan pulley (9).
2.
Install fan hub (6) on fan drive assembly with six washers (8) and capscrews (7).
3.
Remove lifting device and nylon sling from fan hub (6).
ADJUSTMENT
1.
Pivot alternator (4) and install mount bolt (3).
2.
Install alternator adjuster nuts (1and 2) close to markings (made during removal of bolts). Turn adjusting nuts until
deflection on V-belts (5) is 1/2 in. (13 mm). When correct belt deflection is obtained, tighten nuts (1 and 2).
3.
Operate tractor for 30 minutes and recheck belt tension. Adjust position of both alternator adjusting nuts (1 and 2) as
necessary to achieve correct belt deflection.
9
6
2
7,8
5
386-118
3
1
4
386-145
4.
Install hood (WP 0136 00).
END OF WORK PACKAGE
0069 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals