 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FAN AND FAN GUARD REPLACEMENT - CONTINUED
0068 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear
of heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Fan weighs 65 lb (30 kg).
Ensure fan blades are oriented the same as noted during removal.
1.
Secure fan (7) with a nylon sling and attach sling to a suitable lifting device. Lower fan into position at hub (10). Install
eight washers (9) and capscrews (8).
2.
Install left fan guard (3) around fan (7) and secure with five new lockwashers (6) and capscrews (5).
3.
Repeat step 2 for right fan guard (4).
4.
Install capscrew (1) and new lockwasher (2) attaching left and right fan guards (3 and 4).
5.
If removed, install radiator (WP 0063 00).
6.
Install blade lift cylinder mounting tube (WP 0159 00).
7.
Run engine and check for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0068 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals