 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FAN DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0067 00
DISASSEMBLY - CONTINUED
8.
Remove pin (17) and separate shaft (8) from bracket
(16).
17
8
16
386-789
CLEANING AND INSPECTION
1.
Clean and inspect all components IAW WP 0176 00.
2.
Replace any damaged component.
ASSEMBLY
1.
Assemble shaft (8) to bracket (16) with pin (17).
2.
Position pulley (13) over shaft (8) on bracket (16).
3.
Install spacer (14) over shaft (8) on bracket (16).
4.
Install new seal (12) to hub (5).
5.
Install hub (5) over shaft (8) on bracket (16).
6.
Install bearing (11) in hub (5).
7.
Install spacer (10) in hub (5).
NOTE
Ensure bearing is fully seated in hub counterbore.
8.
Install bearing (9) in hub (5).
9.
Install spacer plate (7) to end of shaft (8) with two new self-locking bolts (6).
10.
Install new O-ring (4) to hub (5).
11.
Install grease fitting (15) to bracket (16).
0067 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals