 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
WATER PUMP LINES AND HOSES REPLACEMENT - CONTINUED
0066 00
INSTALLATION - CONTINUED
2.
Install hose (7) on elbow (5).
3.
Position new gaskets (14 and 13) on elbow (5).
4.
Position elbow (5) on engine and top of water pump (12).
5.
Secure elbow (9) to water pump (12) and engine with two capscrews (9) and capscrews (11 and 10).
NOTE
Perform step 6 only if tractor is equipped with a winterized cab.
6.
If removed, connect heater hose (8) to elbow (5).
7.
Position two clamps (6) and tighten.
8.
Install sending unit (4) in elbow (5) and tighten.
9.
Position wire (3) on top of sending unit (4) and install washer (2) and screw (1).
3
4
2
1
5
386-838
10.
Fill cooling system (WP 0060 00).
11.
Run engine and check for proper operation (TM 5-2410-233-10) and coolant leaks or perform pressure test (WP 0061
END OF WORK PACKAGE
0066 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals