 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
RADIATOR MAINTENANCE - CONTINUED
0063 00
REMOVAL
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized cooling sys-
tem and escaping steam or hot coolant may cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen cap to
first stop and let any pressure out of cooling system, then remove cap. Failure to follow this warning may
cause serious burns.
Wear effective eye, glove and skin protection when handling coolants. Failure to do so may cause injury.
1.
Remove three capscrews (1), lockwashers (2) and open upper radiator grille (3). Discard lockwashers.
2.
Remove four capscrews (4), lockwashers (5), and open lower radiator grille (6). Discard lockwashers.
NOTE
Use a suitable container to capture any residual coolant in hoses. Dispose of coolant IAW local policy and
ordinances. Ensure all spills are cleaned up.
3.
Loosen two clamps (7) and remove hose (8) from elbow flange (9) at top of radiator (10).
4.
Remove two capscrews (11), lockwashers (12), elbow flange (9) and gasket (13) from top of radiator (10). Discard lock-
washers and gasket.
5.
Loosen two clamps (14) and remove hose (15) from elbow flange (16) at bottom of radiator (10).
6.
Remove four capscrews (17), lockwashers (18), elbow flange (16) and gasket (19) from bottom of radiator (10). Discard
lockwashers and gasket.
3
11,12
9
1,2
7
8
7
13
10
RADIATOR SHOWN
REMOVED FOR
CLARITY
17,18
14
15
14
386-142
16
6
19
4,5
386-143
0063 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals